5 Future Technologies That Will Slash Home Energy Use

Exotic gear will turn homes into energy producers instead of mere consumers

March 18, 2009 RSS Feed Print
  • Comment (6)

Consumers have heard for years that solar, wind, and geothermal power might soon cut their monthly energy bills. But things get exciting, even exotic, looking a decade or two ahead. Scientists envision that light bulbs will talk to switches, furnaces to windows, and everything to the Internet. Homes generate their own power in basement plants. Windows and paint change color to harvest sunlight or reject it.

But it's one thing for scientists to talk game and another for builders and homeowners to play. Cutting home energy use means changing consumer behavior and industry practice. "The construction trades are among the most conservative out there," says Leon Glicksman, a professor of building technology at the Massachusetts Institute of Technology. It's also a highly fragmented, diffuse industry of mostly small contractors installing separate systems in a home. One does heating, another lighting, a third the electrical system. There often is nobody who integrates the many systems with an eye to energy savings.

So as much as scientists like to talk whiz-bang for the future, what's also needed is training. "It'll be interesting to see 10 or 20 years from now how much progress is technology oriented and how much is education based," says Dariush Arasteh, who studies building technology at Lawrence Berkeley National Laboratory.

That said, promising new technologies are emerging in labs, and some in commercial buildings, that in a decade or two could win over even the most skeptical builders and homeowners.

Tunable tints. In most U.S. climates, there is no easy answer when looking for energy-efficient windows. Today's panes tend to be specific to a type of weather—glass can be treated to reflect sunlight for warm-weather areas or not reflect it for colder climes. "If you're in St. Louis, you ideally want one in summer and another in winter," says Arasteh, whose lab studies window energy use.

Intense research is focusing on smarter windows that can change their coating on demand. A tint could block the sun in hot weather but fade on cold days to let in warm rays. Special "electrochromic" coatings darken when a small voltage is applied. A Minnesota company, Sage Electrochromics, already sells early versions that are used in some high-end homes, usually as skylights.

At current high prices, they make more economic sense for commercial buildings. Factories and offices could reduce daytime lighting costs with more windows but can't afford to let in the sun's heating rays. Homes tend to need more of their light at night and benefit less from natural illumination.

Still, commercial sales can help fine-tune production to get costs down. Then the entire window-producing industry must revamp itself for the new tech, an issue that has held up other energy-saving approaches, such as triple-pane windows. "It's like having a factory that's set up to make simple sandwiches," says Arasteh. "Now you're asking them to make club sandwiches. These changes take years."

Smart homes. Existing home heating, cooling, and lighting systems could save energy with some new smarts. Lights typically don't know they can turn off or dim when the sun comes up, and air handlers continue blowing heated or cooled air at open windows. Simple networking that got all of them talking could wring out a third of energy use in a building, says Neil Gershenfeld, an MIT computer science professor: "It's sort of an Internet of things."

Many companies have tried for the smart home. About 20 different families of gear already exist. But they're not made to work with one another, and none can expand to handle complex systems while being cheap enough to work with a simple light bulb. Gershenfeld's lab has developed a simple networking language—think Morse code—that can turn a light bulb into a node on the Internet, sending and receiving data. The same code could control complicated heating and cooling systems that respond to outside temperature changes, or as people come and go.

Prototypes already exist of hardware that a homeowner might install cheaply, even in an existing structure. One attraction: "We don't have to rewire the whole building," says Charlie Catlett, chief information officer at Argonne National Laboratory, which is installing an early test of the system in one of its buildings. Plus, "these things are so cheap and small that we can actually think about putting them into things like chairs and light bulbs."

Tags:
housing,
energy,
technology

Reader Comments Read all comments (6)

Add Your Thoughts
Your comment will be posted immediately, unless it is spam or contains profanity. For more information, please see our Comments FAQ.

My contribution to lessen the effect of global warming.I have read that industries are the biggest contributor because maybe of the fossil fuel they burned on their production.I have one customer that is consumming around 16 Tons of diesel fuel a month on their 70 HP boiler before i installed the unit but now their consumption was reduced to 8 to 10 tons per month after installation of my compact unit that i called Heat Recovery Unit (HRU).This unit had been in the service for over 3 year now.To this date i had installed 5 units already on five different companies.I have with me testimonials to support this savings from 25 to 40 percent.They are happy to reduce their emission and at the same time reducing their production cost.

Mr. June B. Jumilla 7:34AM June 14, 2009

My sister inlaw use to work where they make appliances for home use around the world.I bought a 220 volt refrigerator with a small dent in the side for half price I could not believe the the first bill.A 50% savings on my next bill.If every home in America had the same thing,what a big saving that would be.Stop and think about that.Now i will be looking into a windmill next.I should be able to sell power back to Consumers than.

Robert J Neveau Sr, of MI 6:30AM June 14, 2009

Many excellent comments, but the number one heating/cooling system should be (will be) low temperatuire geothermal as old heat/cool systems have a lifetime of ~ 15 years.

The next issue is hot water as tanks erode and need replacing. This will likely be a combination of preheat devices (low temp solar collectors) and no reserve water heaters. The existing desuperheaters on all geothermal units will (and do) preheat water. The heat from the fridge is just too small to capture.

Yes, incandescent light bulbs also burn out and the new LED units will capture the market. I still useing/advocating CFLs and T8 long bulbs but Sam's and others are stocking LED units at about $10 per bulb.

Retrofitting houses for aerogel insulations sounds nice, but minimizing air infiltration is THE key. Look for code use of air to air heat exchangers (like Canada) and sealing up houses.

Look for clothes dryers that use outside air (minimize indoor air use).

The above issues are all in houses I have built or owned. Not expensive and each has a payback period of less that 5 years max. Then the return is gravy . . .

Steve Hull

Engineering Consultations

Arcadia, OK

405 550 3023

Steve Hull of OK 5:38AM June 14, 2009

Most Connected Company

Find out how America’s best companies are succeeding by tapping big data, mobile solutions, social media, and crowdsourcing to adapt and compete in an increasingly connected world.

See the companies »

advertisement

Slide Shows

Best-Sellers to Help Your 2013 Finances

Seeking advice? Check out these acclaimed financial books.

10 Warning Signs of Identity Theft

About 10 million Americans fall victim each year.

Items You Should Buy Online

Skip the store to save money and time.

Latest Video

advertisement