Best Careers 2009: Biomedical Equipment Technician

December 11, 2008 RSS Feed Print

Overview. Imagine you're in a hospital bed, hooked up to a heart monitor and a ventilator. Those machines had better be working properly. Fortunately, they almost always are. Whom do you thank? A biomedical equipment tech.

This is one of the few health careers in which you are key to helping patients recover yet there's (usually) no blood or gore. Biomed techs enjoy other pluses, too. You're not limited to repairing stuff: You install, train, calibrate, and perform maintenance. And you're always working on new, ever better equipment such as combined PET/CT scanners and robotic radiosurgery units, which irradiate a tumor but not the surrounding cells. Only a two-year degree is required, and the job market is terrific—you're unlikely to ever hear the word "layoff." This career is resistant to off-shoring, although some state-of-the-art machines allow remote diagnostics, so if a Texas MRI machine breaks down in the middle of the night, a tech in Indiana or India can figure out what's wrong.

This career's main downside is periodic stress. If that heart-lung machine stops working in the middle of a bypass operation, you'd better fix it now. Of course, if you do save the day, you are a true hero. A more significant downside is that biomed techs increasingly need aptitude both for fixing equipment and for tweaking the computers embedded in leading-edge machines, like an automatic infusion pump that can say, "No. That's too big a dose." Ever more knowledge of computer hardware, software, and networking is required.

Another downside is that perhaps one week a month, you'll be on 24-hour call—that patient on the heart-lung machine can't wait until the morning. Fortunately, you're likely to be called in only once or twice a week.

Next time you're visiting someone in the hospital and hear those lifesaving beeps and alarms, think about whether you just want to be grateful to a biomed tech or become one.

Day in the Life. The way the day started, you would never have guessed that this would be one of your most stressful days ever. You arrive at the community hospital that employs you and start on routine maintenance of EKG, ultrasound, and defibrillator machines, and you recalibrate a laser scalpel.

You're interrupted by an emergency page to a patient room—the ventilator isn't working properly. Worse, the hospital's other ventilators are all in use. You race in to check the machine's components: Yes, it's dispensing the oxygen at the proper rate, but you discover that the depth of the "respiration" is too low. Fortunately, the problem is just that a rubber tube came loose. You fix it, and the patient begins breathing normally again.

You're relieved that your next task is to help the manufacturer's field rep install your hospital's second CT scanner. Cool—the new machine is a real improvement over the old one. But the calm doesn't last long. You receive a distress call from a temporary nurse who doesn't understand how to get the new patient monitor to retrieve the needed information. You train her, as a few other nurses look on.

Surgery calls to tell you that the voice-controlled surgical table won't lift the patient's legs up. Lucky again, it's simply a dead battery in the voice-control module.

Finally, you want to give yourself a reward, so, rather than going back to the routine maintenance you started your day with, you tackle repairing the hospital's X-ray film processor. You tinker with it: no luck. You peruse the manual: no luck. But fortunately, there's no rush with this; X-ray film processors aren't used much in today's era of digital radiography. It can wait until tomorrow.

Salary Data

Median (with eight years in the field): $49,000

25th to 75th percentile (with eight or more years of experience): $46,100-$63,400

Note: If you're employed by an equipment manufacturer and you hold the appropriate specialty certification, your salary can exceed $90,000.

(Data provided by PayScale.com)

Bioinstrumentation and Technology conducts an annual salary survey.

Education

A two-year associate of applied science degree is typically required. Leading training programs.

Learn More

Tags:
medical technology,
technology,
careers

Reader Comments Read all comments (122)

Add Your Thoughts
Your comment will be posted immediately, unless it is spam or contains profanity. For more information, please see our Comments FAQ.

I'm a maintenance technician in CHUK HOSPITAL IN RWANDA ,

i WOULD LIKE TO KNOW HOW I CAN GET TRAINING RELATED TO THE RODIO EQUIPMENTS SUCH AS CITY SCAN AND OTHERS,THANKS.

Mucyurabuhoro Philemon.

Mucyurabuhoro Philemon 8:44AM January 24, 2012

I'm a maintenance technician in CHUK HOSPITAL IN RWANDA ,

i WOULD LIKE TO KNOW HOW I CAN GET TRAINING RELATED TO THE RODIO EQUIPMENT SUCH AS CITY SCAN AND OTHER,THANKS.

Mucyurabuhoro Philemon.

Mucyurabuhoro Philemon 8:40AM January 24, 2012

I graduated from a BMET program in Indiana. When I read BOB's comment he is 100% right on the money. There are very few BMET jobs out there. The job security is excellent if you are willing to relocate. I decided not to relocate and continue my education in Engineering. That way I'll be marketable in the western region of Indiana and not have to move to the north west region of the US. I just wish I could find a part time BMET position and go to school to keep me sharp in my new found trade.

BMET Ben of IN 7:31PM January 09, 2012

Jobs That May Interest You

advertisement

U.S. News Rankings & Research

U.S. News delivers quality analysis and clear objective rankings to help you make informed financial decisions.

Advance your career with an online degree

advertisement